Speedway Fabricated Ford 9 Inch Rearend Axle Housing, 54 Inch Width

Description

Made in the USA fabricated steel center section, 3" O.D. axle tubes with 3/16" wall thickness, Axle tubes are internally reinforced for additional strength, less flex, Billet steel "New Big Ford" (Torino) style bearing ends, Housing measures 49" from flange-to-flange, Assembled rearend measures 54" from hub-to-hub (axle flange face-to-face)
Speedway Fabricated Ford 9 Inch Rearend Axle Housing, 54 Inch Width
Sku # 91046254
Mfr. Part # 91046254
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Info
Looking for a budget-friendly, rock-solid foundation for your custom rear suspension? Look no further. Our fabricated steel Ford 9 inch axle housings feature all-new, USA-made components for maximum durability. It’s an evolution of the rugged and reliable 9 inch Ford platform.
Designed with the Builder in Mind
This housing is pumpkin-centered with uniform-length axle tubes, side-to-side. So mounting suspension brackets, especially on triangulated 3-link and 4-link systems, is much easier. Unlike factory stamped housings, these fabricated plate-steel center sections provide a wide, flat surface for easy bracket attachment. Note that the pumpkin-centered design will offset the pinion yoke about 1" to the passenger side.
Axle tubes are 3” O.D. with a 3/16” wall thickness. Heavy-wall tubes, along with a larger center section, significantly reduce distortion during welding of rear-link brackets or spring pads. Billet steel “New Big Ford” (Torino) style bearing ends are fixture-welded (3.150” O.D. bearing, with 2.50” axle flange offset).
Improved Design for Greater Durability
In addition to the heavy-duty bearing ends, the axle tubes are supported with bracing inside the large center housing. This reduces flex in the rear end housing, which is something you won’t find on stamped factory 9 inch housings. Plus, gears stay well-lubed and run cooler thanks to a large-capacity fabricated center (holds more gear oil than stamped housings). Axle is vented on the driver’s side.
Yet, with improved durability, our fabricated axle housing is on average 2 pounds lighter than stock style housings of the same size! Add your choice of axle shafts and third member (sold separately), and you are ready to roll. Equip your race car, hot rod or 4X4 with Ford 9 inch parts from Speedway Motors to ensure there are no weak links in your driveline combination.
Total wheel-to-wheel mounting surface width is 54" (from hub-to-hub). The pumpkin is centered in the housing, which puts the pinion 1" offset from center, requiring different length axle shafts. For this 54" housing you will need one 27-5/8" long axle and one 25-1/4" long axle. This housing includes (8) T-bolts for the axle bearing retainer plates and (10) studs for the third member.
Made in the USA fabricated steel center section
3" O.D. axle tubes with 3/16" wall thickness
Axle tubes are internally reinforced for additional strength, less flex
Billet steel "New Big Ford" (Torino) style bearing ends
Accepts brake kits for 2.50" axle shaft flange offset (from housing flange)
Housing measures 49" from flange-to-flange
Assembled rearend measures 54" from hub-to-hub (axle flange face-to-face)
Improved design weighs only 38.2 lbs vs 40.7 lbs stock-style fabricated housings
Centered pumpkin w/ 1" offset pinion yoke for easy suspension mock-up
Greater-than-stock capacity center section holds more gear oil and runs cooler
Requires different length axle shafts, left/right
Includes vent on driver side axle tube
Includes studs for 3rd member and 3/8” T-bolts for bearing retainer plates
3rd member sold separately
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
Specs
Material Type
Steel
Sold in Quantity
Each
Tube O.D.
3
Overall Width
49
MFG. Part #
91046254
Notes
Assembled rear end (axle flange face-to-face) width is 54"
Reviews
yes
Rated
by Hank on November 26, 2020
Summary:
Good product!
Yes, I recommend this product.
I would buy another
Rated
by Bigdaddy on January 02, 2020
Summary:
Built trough
Related Items / Suggested Parts
Speedway Fabricated Ford 9 Inch Rearend Axle Housing, 56 Inch Width
Currie CE-98129-27625 9 Inch Ford 31 Spline Axle Shaft, 27-5/8 Inch
Currie CE-98126-25250 9 Inch Ford 31 Spline Axle Shaft, 25-1/4 Inch
Third Member Mounting Hardware, Ford 8 inch/9 inchRear End
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.