New - 3M Cold Shrink 8452 Cable Accessory Sealing Kit

Description

Cable Accessory Sealing Kits
provide a reliable means of sealing the
jacket end of power cables where elbows
or other cable accessories are installed.
The seal is accomplished with the use of
a tubular rubber sleeve and rubber base
mastic sealing strips. The mastic strips
seal around cable neutral wires or other
ground attachment leads. The rubber
sleeve is factory expanded and
assembled onto a removable core. As
supplied in this pre-stretched condition
the tube is ready for field installation.
With mastic in place, the expanded tube
is positioned over the cable jacket end
and the inner supporting core is
removed. Removing the core allows the
sealing tube to shrink and form a
water-resistant seal. The sealing tube is
made of EPDM rubber that contains no
chlorides or sulfur. Both the sealing tube
and mastic are compatible with
commonly used power cable jacket and
semi-conductive materials.
To extend the useful life of this product
in applications which are continuously
exposed to high levels of ultra-violet
radiation, overwrap with Scotch Super
33+ Vinyl Tape or Scotch 70 Silicone
Tape.
Features:
Accommodates a wide range of cable
sizes.
No torch or heat required.
Seals tight, retains its resiliency and
pressure even after prolonged years of
aging and exposure.
Thick walled to resist puncture and
damage.
Water-resistant. Meets the water seal
requirements of ANSI C119.1.
Compatible with cable jackets and
semi-conducting insulation shields.
Resists fungus.
Resists acids and alkalies.
Resists ozone and ultraviolet light.
2. Applications
Cable Accessory Sealing Kit’s are used
to seal the cable jacket end of high
voltage power cables where the cables
jacket has been removed for the
installation of an elbow or other cable
accessory. The Cable Accessory Sealing
Kits can be installed at indoor and
outdoor locations and are suitable for
direct burial, aerial and submersible
applications.