530/560PCS/Set Polyolefin Shrinking Assorted Insulated Heat Shrink Sleeving Tube

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
530/560PCS/Set Polyolefin Shrinking Assorted Insulated Heat Shrink Sleeving Tube
Popular
Popular
Product Introduction
560PCS:
1. There are 5 colors to help distinguish different sizes: yellow, blue, black, green, red.
2. There are 11 specifications in total to meet your different needs: wire connection, solder joint protection, wire harness end, etc.
3. Excellent environmental protection, insulation, softness, stable performance, low shrinkage temperature and fast shrinkage.
4. Waterproof sealing, environmental protection.
5. The product is simple and convenient
Product parameters:
Material: Polyolefin
Shrinkage: 2:1 (Maximum shrinkage can reach 1/2 of its supply diameter).
Operating temperature: -55°C~+125°C
Minimum shrinkage temperature: +70°C
Full shrinkage temperature: up to +110°C
Tensile strength: 10.4 MPa
Dielectric strength: 15kV/mm
Flammability: flame retardant
530PCS :
Supplied internal diameter: 1.5/2.0/3.0/4.0/5.0/6.0/8.0/10.0mm
Fully shrunk internal diameter: 0.75/1.0/1.5/2.0/2.5/3.0/4.0/5.0mm
Color: Black, Yellow, Green, Red, Blue
Quantity: 530pcs /pack
Material: Polyolefin
Shrinkage Ratio: 2:1 (will maximum shrink to 1/2 its supplied diameter)
Minimum Shrinkage Temp: ≥84°C
Full Shrinkage Temp: ≥120°C
Operating Temperature: -55°C to +125°C
Tensile strength: 10.4Mpa
Dielectric strength: 15KV/mm
Flammability: Flame Retardant
Approvals: UL Approved
Supplied format (round or flat): Product is supplied flat
Cutting method: Scissors or sharp blade
(Quantity+Diameter+Length+Color)
80PCS 1.5 x 45mm Yellow
80
PCS
2.0 x 45mm Blue
80
PCS
2.0 x 45mm Black
60
PCS
3.0 x 45mm Green
50
PCS
4.0 x 45mm Red
50
PCS
4.0 x 45mm Black
30
PCS
5.0 x 45mm Black
20
PCS
6.0 x 45mm Yellow
20
PCS
8.0 x 45mm Red
20
PCS
10.0 x 45mm Green
20
PCS
10.0 x 45mm Blue
20
PCS
10.0 x 45mm Black
Note:
Please allow 1-5mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
Package List:  (according buyer  choose)
530/560PCS Polyolefin Heat Shrink Tubing
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
530/560PCS/Set Polyolefin Shrinking Assorted Insulated Heat Shrink Sleeving Tube
Product Introduction
560PCS:
1. There are 5 colors to help distinguish different sizes: yellow, blue, black, green, red.
2. There are 11 specifications in total to meet your different needs: wire connection, solder joint protection, wire harness end, etc.
3. Excellent environmental protection, insulation, softness, stable performance, low shrinkage temperature and fast shrinkage.
4. Waterproof sealing, environmental protection.
5. The product is simple and convenient
Product parameters:
Material: Polyolefin
Shrinkage: 2:1 (Maximum shrinkage can reach 1/2 of its supply diameter).
Operating temperature: -55°C~+125°C
Minimum shrinkage temperature: +70°C
Full shrinkage temperature: up to +110°C
Tensile strength: 10.4 MPa
Dielectric strength: 15kV/mm
Flammability: flame retardant
530PCS :
Supplied internal diameter: 1.5/2.0/3.0/4.0/5.0/6.0/8.0/10.0mm
Fully shrunk internal diameter: 0.75/1.0/1.5/2.0/2.5/3.0/4.0/5.0mm
Color: Black, Yellow, Green, Red, Blue
Quantity: 530pcs /pack
Material: Polyolefin
Shrinkage Ratio: 2:1 (will maximum shrink to 1/2 its supplied diameter)
Minimum Shrinkage Temp: ≥84°C
Full Shrinkage Temp: ≥120°C
Operating Temperature: -55°C to +125°C
Tensile strength: 10.4Mpa
Dielectric strength: 15KV/mm
Flammability: Flame Retardant
Approvals: UL Approved
Supplied format (round or flat): Product is supplied flat
Cutting method: Scissors or sharp blade
(Quantity+Diameter+Length+Color)
80PCS 1.5 x 45mm Yellow
80
PCS
2.0 x 45mm Blue
80
PCS
2.0 x 45mm Black
60
PCS
3.0 x 45mm Green
50
PCS
4.0 x 45mm Red
50
PCS
4.0 x 45mm Black
30
PCS
5.0 x 45mm Black
20
PCS
6.0 x 45mm Yellow
20
PCS
8.0 x 45mm Red
20
PCS
10.0 x 45mm Green
20
PCS
10.0 x 45mm Blue
20
PCS
10.0 x 45mm Black
Note:
Please allow 1-5mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
Package List:  (according buyer  choose)
530/560PCS Polyolefin Heat Shrink Tubing
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.