-40%

45PCS 3:1 Dual Wall Adhesive Heat Shrink Glue Tube Kit 4 Sizes Clear 3.5''

$ 8.22

Availability: 100 in stock
  • MPN: Does not apply
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Restocking Fee: No
  • Brand: Unbranded
  • Custom Bundle: No
  • Item must be returned within: 30 Days
  • Item Length: 3.5 inch (90mm)
  • Sheath Color: Clear
  • Condition: New
  • Heat Shrink Ratio: 3:1
  • Material: Polyethylene (PE)
  • Type: Heat Shrink Tubing

    Description

    45Pcs Dual Wall Heat Shrink Tubing 3:1 Adhesive GLUE Lined 1/4" 3/8" 1/2" 3/4"
    Description:
    Adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. When heated in excess of 121ºC (250ºF), the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water resistant barrier. Adhesive reflow will occur at temperatures above 80ºC (176ºF).
    Specifications:
    Length of each section: 3.5 inch (90mm)
    Diameter: 1/4" 3/8" 1/2" 3/4"
    Color: Clear
    Material: Polyolefin
    Heat shrink ratio: 3:1
    Operating Temperature:-131°F to + 257℉
    Shrinkage Temp: 212℉(Fahrenheit)
    Full Shrinkage Temp: 230℉maximum
    Tensile strength: 10.4Mpa
    Dielectric strength: 15 kV / mm
    Flammability: Flame Retardant
    Features:
    [The rubber liner has good sealing performance]
    Our heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break.
    [Easy and fast]
    You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to the original 1/3.
    [Versatile and DIY Helper]
    High-quality heat shrink tubing, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection.
    [Great Advantages]
    Our heat-shrinkable tube are with glue lined which has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break.
    [A wide range of applications]
    Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on.