-40%
3
3
3
3

3" ID Yellow Heat Shrink Tube 2:1 ratio wrap (10 feet) polyolefin 3.0" inch 80mm

$ 16.88

Availability: 17 in stock
  • Minimum Operating Temperature (Actual): -55°C
  • Actual Length (Feet): 10 feet
  • Structural Build: Flexible
  • Material: Polyolefin
  • Brand: Yongli
  • Standards/Compliance: RoHS
  • Sheath Color: Yellow
  • Actual Inside Diameter (ID): 82mm +/- 1.5
  • Country/Region of Manufacture: China
  • Condition: New
  • Maximum Operating Temperature (Actual): 125°C
  • Type: Heat Shrink Tubing
  • Nominal Inside Diameter (ID): 3.0" (80mm)
  • Heat Shrink Ratio: 2:1

    Description

    You will receive
    10 feet of YELLOW 3.0"(80mm) I.D. (inner diameter) tubing
    per quantity ordered
    The 80mm ID tube is approximately 5.0" wide while flattened before use. Diameter and width are not the same thing!
    If you need a tube that is about 3" wide while flattened, you instead want the 50mm ID tube.
    You can find that here:
    https://www.ebay.com/itm/203049616047
    Smaller sized tubes can be found here:
    https://www.ebay.com/itm/203049859100
    Tubes with adhesive inner wall (dual-wall tubing) can be found here: https://www.ebay.com/itm/203049856945
    If you need a longer uncut continuous length of tubing, it is usually available upon special request - add a note or message to request!
    Add multiple of my items to your cart to unlock higher discounts!
    Premium polyolefin heat shrinkable tubing
    2 to 1 shrinkage ratio; will shrink to half of the stated inner diameter
    All stated diameters are
    internal diameter pre-shrunk measurements
    Small printing on the tubing states the diameter and temperature range (some colors/sizes may have no printing)
    UNDERSTANDING THE SIZING CHART:
    Nominal Internal Diameter - this is the starting size, referred to in the title of each post
    Actual Internal Diameter - the tubing is actually slightly larger than the nominal size to ensure a proper fit!
    Approximate Flat Width - larger sizes start out folded down flat, this is a flat dimension for your reference
    Shrunk Internal Diameter - the tubing will shrink down to smaller than this size, guaranteed!