-40%
10 ft 3/8
10 ft 3/8
10 ft 3/8
10 ft 3/8
10 ft 3/8
10 ft 3/8
10 ft 3/8
10 ft 3/8
10 ft 3/8
10 ft 3/8
10 ft 3/8

10 ft 3/8" Heat Shrink Tubing 3:1 Marine Grade Electrical Wire Adhesive Lined

$ 5.8

Availability: 66 in stock
  • Type: Heat Shrink
  • Heat Shrink Ratio: 3:1
  • Operating temperature: -50℃~, 125℃
  • feature 3: Cable Protector,Electrical Insulation Sealing,
  • MPN: Heat Shrink Tubing Wire Wrap
  • UPC: 791785932357
  • Item must be returned within: 60 Days
  • Applications: Automotive industries, Electronics industries, Power stations
  • Minimum shrink temperature: 80℃
  • Full Shrinkage Temp: 120℃
  • Dielectric strength: 15 kV/mm
  • feature 1: Waterproof,Flame Retardant,Wear-Resistant,Oil-Proof
  • Return shipping will be paid by: Buyer
  • Sheath Color: Black
  • feature 2: Marine Grade,Double-wall,Adhesive Glue Lined
  • Restocking Fee: No
  • Nominal Outside Diameter (OD): 0.38 in
  • Feature: Prevent Dust, Solvents, And Other Foreign Materials
  • Tensile strength: 10.4 Mpa
  • Brand: car elements
  • Item Length: 10 ft
  • Condition: New
  • All returns accepted: Returns Accepted
  • Conduit Type: Electrical Insulation Tubing
  • Nominal Inside Diameter (ID): 3/8 in
  • Refund will be given as: Money Back
  • Model: Heat Shrink Tubing Wire Assortment Wrap

    Description

    3:1 SHRINK RATIO
    - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough.
    GLUE INSIDE
    - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation.
    EASY TO USE
    - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds.
    DUAL WALL TUBING
    - Provides enhanced protection from wear and tear. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch.
    SHRINK TUBING DIAMETER
    - Get the exact diameter you need. we have enough of shrink tubing will last through many projects
    Heat Shrink Tubing
    Are you looking to fix a damaged wire, seal out moisture, or provide enhanced strain relief? waterproof heat shrink tubing is an easy to use solution that can be used in automotive, marine, hobby RC, and home electrical wiring projects. It can be used in a variety of applications such as:
    Electrical insulation (wire repairs, insulating electrical terminals wires, protecting charging cables, insulating solder joints)Environmental seal to protect from moisture, UV and fuelStrain relief for electrical terminalsIdentifying wires and cables (color-coding)Grouping loose wires (usually in wire harnesses)Creating thermal insulation for heat sensitive componentsProtecting surfaces against abrasion, peeling, and denting3:1 Shrink Ratio Shrink Tube
    When heat is applied, this wire shrink wrap tubing will recover to a 1/3 of its original diameter. Its high recovery ratio makes it possible to repair most damaged cable jackets without removing connectors. Therefore, 3:1 shrink ratio tubing can be used in significantly more applications compared to 2:1 shrink ratio tubing. Additionally, 3:1 marine heat-shrink tubing shrinks around wires and terminals more tightly, eliminating any air gaps.
    Heat Activated Adhesive Lining
    This is a waterproof shrink tubing with the internal adhesive layer. When heat is applied, shrink tubing recovers and the internal adhesive layer melts. A small fillet of clear adhesive (about 1 mm wide) becomes visible at the end of the heated tubing. When cooled down, it forms a rigid seal. Heat activated glue strongly adheres to wires, terminals or any other surfaces. When adhesive flows, it pushes the air out and fills any gaps between the wire and the tubing, which makes the connection waterproof. For best results we recommend using a heat gun.
    Dual Wall Shrink Tubing
    Dual wall marine grade heat shrink tubing provides better rigidity and abrasion resistance. Dual wall tubing design has the increased ability to stand up to wear and tear. This wire heat shrink tubing is flame retardant.
    UL Listed
    This industrial grade heat shrinkable tubing is UL listed and is compliant with all relevant electrical standards such as: SGS, RoHS, Reach, and ISO9001.
    Our Collection of Heat Shrink Tubing
    assorted heat shrink tubing comes in kits as well as 50 Ft rolls. We offer a great variety of sizes (3/32” to 2”) and colors (black, red, white, blue, clear).